George Daniels: The Self-Taught Watchmaker Who Wrote the Book
Petter TrobeShare
When George Daniels was five years old he found a broken watch, opened the back, and later described the moment as like seeing the centre of the universe. He would spend the rest of his life inside it. By the time he died in 2011 he had made, entirely by his own hands, a small number of watches that now sell for millions, invented the first new escapement to reach mass production in two centuries, and written the book that more amateur watchmakers have learned from than any other. This is the third of our stories from watchmaking, and for anyone learning the craft at a kitchen table it may be the most useful.
A hard start
Daniels was born on 19 August 1926, one of eleven children in a poor London family. His father drank and was violent, though he was good at repairing radios, and the boy took what he could from that. He left school at fourteen, worked in a mattress factory and went door to door repairing watches for whatever people would pay. In 1944 he was called up and served three years in the East Yorkshire Regiment, where he repaired his comrades' watches. He was demobilised in 1947 with fifty pounds, took night classes in horology, worked as a repairer and restorer, and by 1960 had his own workshop in London.
Restoration is where he learned his standards. He spent years handling the work of Abraham-Louis Breguet, the greatest watchmaker of the eighteenth century, and came to the conclusion that the only way to make watches of that quality was the way Breguet's workshop had: to understand every part well enough to make it.
The Daniels Method
Most watches, even very expensive ones, are assembled from parts made by specialists: a case maker, a dial maker, a hand maker, a movement supplier, an engraver. Daniels decided to do all of it himself. He taught himself the thirty-two separate crafts involved in making a watch, from turning and wheel cutting to case making, enamelling, engine turning, gilding and hairspring forming, and made every component of his watches alone at his bench. This became known as the Daniels Method. It is the reason his output was so small: each watch took around 2,500 hours, roughly a year of work, and over his lifetime he completed only a few dozen. The count is disputed between sources, with 23 pocket watches and two wristwatches the figure most often given, and it does not much matter. Every one of them is a complete watch made by one man.
The co-axial escapement
The lever escapement that ticks in every mechanical watch, including the Miyota 82S0, delivers its impulse by sliding: an escape-wheel tooth drags across a ruby pallet. The sliding needs oil, and oil deteriorates, which is why watches need servicing. Daniels regarded this as the unfinished business of horology and in 1974 he solved it. His co-axial escapement uses two escape wheels on the same axis and three pallets, separating the locking function from the impulse so that the push is delivered almost without sliding. In theory it needs no lubrication at the pallets; in practice it needs very little. He fitted it first to his tenth watch in 1976, and patented it in 1980.
Then he spent nearly twenty years trying to give it away. Rolex and Patek Philippe declined. It was Nicolas Hayek, chairman of the Swatch Group, who finally bought it for Omega, and the first production co-axial watch, a De Ville, appeared in 1999. Omega now uses the escapement across most of its range. Daniels, never a modest man, said he had known immediately that his invention was superior to all the others. Of quartz, which arrived in the middle of his career and threatened to make the whole craft obsolete, he said it had the dedicated ambition to commit suicide as soon as possible.
The book
In 1981 Daniels published Watchmaking. It is not a history and not a coffee-table book. It is a manual, some four hundred pages, that explains how to make a watch from raw material, with drawings of every tool and every operation, in a plain and slightly severe voice. It assumes nothing except patience. For forty years it has been the book that self-taught watchmakers reach for after they have taken their first movement apart and want to know what comes next. It is still in print. If you find, after building a movement, that you want to go further, it is the next thing to buy.
The Isle of Man and the apprentice
Daniels moved to Ramsey on the Isle of Man in 1982. He was made Master of the Worshipful Company of Clockmakers in 1980, given an honorary doctorate by City University in 2007 and appointed CBE in 2010. And in 1990 a 22-year-old named Roger Smith, who had heard Daniels lecture at the British Horological Institute and decided to build a watch the Daniels way, turned up on the island with his first pocket watch. Daniels looked at it and told him it looked handmade rather than created. Smith went home and spent five years on a second one. Daniels accepted that one, and invited Smith to work with him on the Daniels Millennium series, a run of wristwatches with co-axial escapements built to mark the year 2000. Smith later said that Daniels always insisted there was no point taking this route unless it was to improve something. When Daniels died in 2011, he left Smith his workshop. Roger W. Smith still makes watches on the Isle of Man, by the Daniels Method, and is widely regarded as Daniels' successor.
The Space Traveller
In 1982 Daniels made two pocket watches to commemorate the Moon landing, which he called the Space Traveller. Each shows mean solar time and sidereal time, the equation of time, the phase of the moon, an annual calendar and a chronograph, all made by one pair of hands. When asked what it was for, he said that when you are on your package tour to Mars, you need a watch like this. The second one sold at Sotheby's in London in September 2017 for 3.2 million pounds and is now on loan to the Clockmakers' Museum at the Science Museum. The first sold, also at Sotheby's, on 2 July 2019 for 3.62 million pounds, a record for an English watch. The sale of his personal collection in 2012 raised over eight million pounds, most of which went to the George Daniels Educational Trust, which funds students of horology, engineering and medicine at City University.
Why this matters to a beginner
It is easy to take from Daniels the lesson that genius is rare. The more accurate lesson is that he was not a prodigy in any conventional sense; he was a poor boy who repaired watches door to door, learned at night classes, and taught himself one skill at a time until there were no skills left to learn. He said he never made watches for people he did not care for. He also spent twenty years being told his best idea was not wanted. If you have just assembled your first movement with the Calibre Learning Kit and are wondering whether it is worth going further, Daniels is the answer to that question, in book form.
Sources and further reading
- SJX Watches, George Daniels Space Traveller sets record price
- Science Museum, Space Traveller II watch goes on display
- Phillips, The George Daniels Grand Complication explained by Roger Smith
- Worn & Wound, Why George Daniels' co-axial escapement revolutionised mechanical watchmaking
- Europa Star, Roger W. Smith, the watchmaker's watchmaker
- WorldTempus, Sotheby's George Daniels collection sale, 2012
- Penge Heritage Trail, George Daniels 1926 to 2011
- Wikipedia, George Daniels and Roger W. Smith
- George Daniels, Watchmaking (1981, revised editions in print)