Rexhep Rexhepi Wins the 2026 GPHG: Why a Thin Chronograph Is So Hard to Build
Petter TrobeShare
On Saturday 7 November, the 26th Grand Prix d'Horlogerie de Genève handed its top prize, the Aiguille d'Or, to Rexhep Rexhepi for his Chronograph Flyback. It is his first chronograph, and it came out on top of a field of 84 nominated watches that included pieces from Audemars Piguet, Chopard and Parmigiani Fleurier.
Last year the same prize went to Breguet, a house with more than two centuries behind it. This year it went to a man with a workshop in Geneva's old town and a handful of watchmakers. That contrast is most of the story, but not all of it. The more interesting part is inside the case.
The watch
The Chronograph Flyback has a platinum case of 38.8 mm, which is modest by modern standards, and it is only 9.7 mm thick. The dial is grand feu enamel in a dark storm blue. Hours and minutes sit in a small subdial at twelve o'clock, so the big central hand belongs to the chronograph and sweeps across almost the whole face.
Under the dial is a new hand-wound movement with 72 hours of power reserve. The chronograph is controlled by a column wheel and engaged through a lateral clutch, and it has a flyback function. The 30-minute counter jumps from one minute to the next instead of creeping forward.
None of those features is new on its own. What makes the watch unusual is how they have been put together.
Why the thickness matters
There are two ways to give a watch a chronograph. The common one is to take an ordinary movement and bolt a chronograph module on top of it. It works, it is cheaper, and most chronographs on the market are made this way. The price is height: you are stacking one mechanism on another, and the watch gets thick.
The other way is to design the chronograph into the movement from the start, so the timekeeping parts and the chronograph parts share the same plates and bridges. That is an integrated chronograph. It is far more work to design and much harder to make, which is why relatively few manufacturers do it.
Rexhepi has said that the thickness he wanted simply did not leave room for a module, so the chronograph had to be built into the movement. At 9.7 mm, with a column wheel, a flyback and a jumping minute counter, that is a tight squeeze. Each of those parts needs space, and every tenth of a millimetre has to be argued for.
If you have ever had a movement apart on the bench, you know how crowded even a simple three-hand calibre is. A chronograph adds dozens of parts: levers, springs, a clutch, extra wheels and the column wheel itself. Fitting all of that into a thin case, and making it reset cleanly every time, is the kind of problem that takes years to solve.
What "flyback" means
On a normal chronograph you have to stop, reset and start again if you want to time a new interval. Three presses of the pushers. A flyback lets you press the reset pusher while the chronograph is running: the hands snap back to zero and immediately start timing again. It was originally made for pilots who needed to time consecutive legs of a flight without fumbling. Today it is mostly a sign that the movement's designer went the extra mile.
We explain column wheels, clutches and the flyback in more detail in How a Chronograph Works.
Who is Rexhep Rexhepi?
Rexhepi came to Geneva from Kosovo in 1998, aged 11, to join his father. As a teenager he started an apprenticeship at Patek Philippe, then spent three years at BNB Concept, a workshop that designed complicated movements for other brands, and later worked at F.P. Journe. In 2012, at 25, he founded his own atelier, AkriviA, named after the Greek word for precision. His first piece was a tourbillon chronograph he had built at his own workbench.
For years his work was mainly tourbillons. Then in 2018 he put his own name on a dial for the first time with the Chronomètre Contemporain, a deliberately simple time-only watch with exceptional finishing. It made him one of the most sought-after names among collectors. The Chronograph Flyback is the first major complication he has built around his own in-house movement, and the first time the Aiguille d'Or has gone to an independent since MB&F won it in 2022.
The other winners
Twenty prizes were awarded in total by a jury chaired by Wei Koh. A few that stood out:
- Chronograph Watch Prize: Parmigiani Fleurier, Tonda PF Chronographe Mystérieux
- Iconic Watch Prize: Audemars Piguet, Royal Oak "Jumbo" Extra-Thin Flying Tourbillon Chronograph RD#5
- Calendar and Astronomy Watch Prize: Audemars Piguet, 150 Heritage
- Tourbillon Watch Prize: Ferdinand Berthoud, Chronomètre FB 2TV
- Chronometry Prize: Ferdinand Berthoud, Naissance d'une Montre 3
- Time Only Watch Prize: Chopard, L.U.C 1860
- Sports Watch Prize: Grand Seiko, Spring Drive U.F.A. Ushio 300 Diver
- Audacity Prize: Konstantin Chaykin, ThinKing Mystery
- Petite Aiguille Prize: Otsuka Lotec, No.8
Two winners say a lot about where watchmaking is heading. Otsuka Lotec is a one-man Japanese workshop that builds watches on old, hand-operated machines. Ferdinand Berthoud took two prizes, one of them for chronometry, which is the unglamorous art of making a watch keep good time. Both are reminders that the most respected work right now is not about size or price but about doing the basic things extremely well.
Why it matters if you are just getting started
It is easy to look at a watch like this and feel it belongs to another world. Its price has not been published, and the waiting list will be long. But the principles inside it are the same ones you meet the first time you take a movement apart: a mainspring, a gear train, an escapement and a balance. A chronograph is those basics with a second mechanism laid over them. Understanding the first makes the second far less mysterious.
If you are in London, the winning watches are on display from 18 to 23 November.