Why Do Watches Have Jewels? Rubies, Friction and the Meaning of 21 Jewels
Petter TrobeDele
Turn a mechanical movement over and you will see them: small, deep-red discs set into the plates and bridges, catching the light like something precious. The specification sheet counts them. The Miyota 82S0 in our learning kit has 21. Older watches proudly engraved the number on the movement. And almost everyone, on first meeting them, asks the same two questions. Are they real rubies? And why are they there?
The answers are yes, and because steel wears out. This is the second article in our How It Works series.
The problem the jewels solve
Every wheel in a movement turns on a steel axle, called an arbor, whose ends are ground down to very fine pivots. In the balance wheel those pivots are a fraction of a tenth of a millimetre across, and the balance swings back and forth around 21,600 times an hour, every hour, for years. If a steel pivot ran in a hole in a brass plate, the hole would wear oval, the oil would turn black with metal dust, and the watch would lose its rate long before it lost its looks.
The solution, found early in the eighteenth century, was to line the holes with something harder and smoother than either metal. Corundum, the mineral that makes ruby and sapphire, is second only to diamond in hardness, takes a mirror polish, does not corrode and holds a film of oil beautifully. A steel pivot running in a polished ruby hole has very low friction, and, more importantly for timekeeping, very consistent friction. As one horological reference puts it, variation in friction at the balance pivots is the single most significant point at which timekeeping is affected.
A patent, a lawsuit and a Swiss mathematician
Jewelled bearings were invented in 1704 by the Swiss mathematician Nicolas Fatio de Duillier and the brothers Peter and Jacob Debaufre, working in London. They obtained an English patent, number 371, dated 1 May 1704, for a method of piercing rubies. The Worshipful Company of Clockmakers, alarmed at the idea of a monopoly on such a useful technique, successfully petitioned Parliament to block the patent's extension the following January. The technique spread through London watchmaking and stayed largely English for most of the century. Fatio, incidentally, is better remembered by historians as a close friend of Isaac Newton.
Where the jewels sit
There are four kinds of jewel in a modern movement, and they do slightly different jobs.
Hole jewels are the doughnut-shaped bearings that the pivots turn in. Most of the count is these.
Cap jewels, or endstones, are flat discs placed over the end of a hole jewel so the tip of the pivot runs against a flat, polished surface rather than a shoulder. You will find them on the balance staff, usually held in a spring-loaded shock-protection setting, which is why the jewel over the balance looks different from the others.
Pallet stones are the two rectangular rubies on the pallet fork that catch and release the escape wheel. They are jewels because the escape-wheel teeth slide across them at every beat.
The impulse jewel is the single ruby pin on the balance roller that knocks the pallet fork back and forth. It is the only jewel in the movement that is not a bearing.
Why 17 became the magic number
Count them up for a simple hand-wound movement: two hole jewels, two cap jewels and one impulse jewel for the balance, that is five; two hole jewels and two pallet stones for the pallet fork, nine; two hole jewels each for the escape wheel, fourth wheel, third wheel and centre wheel, seventeen. That is why 17 jewels was, for most of the twentieth century, the definition of a fully jewelled movement. Before the centre wheel was routinely jewelled, the figure was 15.
Anything beyond 17 is either jewelling less critical, slower-turning parts such as the barrel arbor, or jewelling the automatic winding mechanism. The Miyota 82S0's 21 jewels follow this logic: a fully jewelled base movement plus extra jewels in the self-winding module, which adds reduction and reverser wheels and a rotor bearing. Miyota does not publish a map of exactly where its 21 sit, so we will not pretend to give you one, but that is the shape of the arithmetic.
There was also a less noble reason for 17. For much of the twentieth century, American import duties on watches stepped up sharply above 17 jewels, so a great many Swiss export movements were designed to have exactly 17, and not one more.
When the count went silly
Because buyers had learned that more jewels meant a better watch, the 1950s and 1960s produced a small arms race. Waltham, Hampden and others sold watches marked with 41, 50 and eventually 100 jewels. The Waltham 100 had 17 functional jewels; the other 83 were set decoratively around a ring on the rotor, doing nothing at all. It is a good watch to remember when you see a jewel count today, and it is the reason the industry eventually wrote a standard. ISO 1112, first published in 1974 and revised since, defines what a functional jewel is, how non-functional jewels must be described, and how jewel counts may be used in advertising. In the United States, the Federal Trade Commission's guides for the watch industry set a minimum of seven jewels for a movement to be called jewelled, and the guides were only withdrawn in 1999.
Are they real?
They are real corundum, but they are not mined. In 1902 the French chemist Auguste Verneuil published a flame-fusion process for growing synthetic ruby and sapphire from aluminium oxide powder, and within a couple of decades virtually every jewel in every watch was synthetic. Ruby and sapphire are the same mineral; the red comes from a trace of chromium, and watch jewels are usually made red simply so the watchmaker can see them. A jewel costs a few cents. If your watch has 21 of them, that is not why it was expensive.
What this means at the bench
Jewels matter to you as a beginner for one practical reason: the pivots that run in them are the most fragile things you will handle. When you lower a bridge onto the gear train, every pivot must find its jewel before the bridge seats. If the bridge will not go down, a pivot is beside its hole, not in it, and pressing harder will bend or snap it. Look through the loupe, back off, and try again. When you refit the balance, the cap jewel in its shock setting is where the balance staff has to land. The Calibre Learning Kit lessons spend time on exactly this, because it is the step where patience pays most.
Once the movement runs, take a moment with the loupe over the balance jewel. A tiny polished stone, invented by a friend of Newton's, grown in a furnace, and doing its job six times a second.
Common misunderstandings
More jewels does not mean a better watch beyond the functional count; it means a more complicated movement, or marketing. The jewels are not valuable. Ruby and sapphire are the same material. And a 17-jewel hand-wound movement is not inferior to a 21-jewel automatic; the extra four are simply doing a job the hand-wound movement does not have.
Sources and further reading
- Wikipedia, Jewel bearing
- Vintage Watch Straps, Watch jewels
- Caliber Corner, All about watch jewels
- ISO, ISO 1112: Functional and non-functional jewels
- US Federal Trade Commission, Guides for the Watch Industry, rescission notice (1999)
- Miyota, Cal. 82S0 specifications